1 open source board using the USB5816C-I/KD
Real designs built with the USB5816C-I/KD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
eez-openThe USB5816C-I/KD in open source designs
The gallery holds 1 open source boards using the USB5816C-I/KD from 1 GitHub repository; a typical one measures about 180.5 × 176 mm and carries around 262 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is BB3plus test mainboard by eez-open.
Microcontrollers on boards using the USB5816C-I/KD
What boards using the USB5816C-I/KD are built for
USB5816C-I/KD: common questions
Where can I find a USB5816C-I/KD reference design?
Each of the 1 boards on this page is a real design using the USB5816C-I/KD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USB5816C-I/KD use?
Most are built on STM32 (1).
How big is a typical board using the USB5816C-I/KD?
The median is 180.5 × 176 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB5816C-I/KD?
By GitHub stars, BB3plus test mainboard by eez-open, with 12 stars.
Can I simulate one of these boards using the USB5816C-I/KD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.