3 open source boards using the ADP7118AUJZ-5.0-R7
Real designs built with the ADP7118AUJZ-5.0-R7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PICMystat
matthew-yates
60 × 81 mm91 parts4LGPL-3.09
CLAWS Receiver and Power Distribution Board
burbschat
75 × 50 mm72 parts4LCERN-OHL-S-2.00
Power supply lt3571 single
75 × 50 mm41 parts2LCERN-OHL-S-2.00
The ADP7118AUJZ-5.0-R7 in open source designs
The gallery holds 3 open source boards using the ADP7118AUJZ-5.0-R7 from 2 GitHub repositories; a typical one measures about 75 × 50 mm and carries around 72 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Mystat by matthew-yates.
Microcontrollers on boards using the ADP7118AUJZ-5.0-R7
What boards using the ADP7118AUJZ-5.0-R7 are built for
ADP7118AUJZ-5.0-R7: common questions
Where can I find a ADP7118AUJZ-5.0-R7 reference design?
Each of the 3 boards on this page is a real design using the ADP7118AUJZ-5.0-R7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADP7118AUJZ-5.0-R7 use?
Most are built on PIC (1).
How big is a typical board using the ADP7118AUJZ-5.0-R7?
The median is 75 × 50 mm, and 33% are two-layer designs.
What is the most popular open source board using the ADP7118AUJZ-5.0-R7?
By GitHub stars, Mystat by matthew-yates, with 9 stars.
Can I simulate one of these boards using the ADP7118AUJZ-5.0-R7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.