3 open source boards using the ADR510
Real designs built with the ADR510, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoVm101-inout
mirdej
130 × 105 mm233 parts4LNo license23
Vm122-masterfader
56 × 160 mm74 parts2LNo license23
AVR/ArduinoVm010-channelcontrol
30 × 181.5 mm58 parts4LNo license23
The ADR510 in open source designs
The gallery holds 3 open source boards using the ADR510 from 1 GitHub repository; a typical one measures about 56 × 160 mm and carries around 74 components.
67% use four copper layers or more, and 0% carry an open source license.
The most starred is Vm101-inout by mirdej.
Microcontrollers on boards using the ADR510
What boards using the ADR510 are built for
ADR510: common questions
Where can I find a ADR510 reference design?
Each of the 3 boards on this page is a real design using the ADR510. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ADR510 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the ADR510?
The median is 56 × 160 mm, and 33% are two-layer designs.
What is the most popular open source board using the ADR510?
By GitHub stars, Vm101-inout by mirdej, with 23 stars.
Can I simulate one of these boards using the ADR510 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.