3 open source boards using the AFT05MS003NT1
Real designs built with the AFT05MS003NT1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Transponder-12.0.1
peterantypas
90.4 × 25 mm115 parts4LGPL-3.0444
STM32Transponder-11.9.1
84 × 25 mm109 parts4LGPL-3.0444
STM32NMEA2000Adapter-8.1
46 × 46 mm52 parts2LGPL-3.0444
The AFT05MS003NT1 in open source designs
The gallery holds 3 open source boards using the AFT05MS003NT1 from 1 GitHub repository; a typical one measures about 84 × 25 mm and carries around 109 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is Transponder-12.0.1 by peterantypas.
Microcontrollers on boards using the AFT05MS003NT1
AFT05MS003NT1: common questions
Where can I find a AFT05MS003NT1 reference design?
Each of the 3 boards on this page is a real design using the AFT05MS003NT1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AFT05MS003NT1 use?
Most are built on STM32 (3).
How big is a typical board using the AFT05MS003NT1?
The median is 84 × 25 mm, and 33% are two-layer designs.
What is the most popular open source board using the AFT05MS003NT1?
By GitHub stars, Transponder-12.0.1 by peterantypas, with 444 stars.
Can I simulate one of these boards using the AFT05MS003NT1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.