2 open source boards using the AZ1117EH-3.3TRG1
Real designs built with the AZ1117EH-3.3TRG1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Protoboard power
IsmaelLopesSilva
53 × 26 mm14 parts2LNo license14
Ksz9031-eval
azonenberg
77 × 71.5 mm167 parts4LBSD-3-Clause17
The AZ1117EH-3.3TRG1 in open source designs
The gallery holds 2 open source boards using the AZ1117EH-3.3TRG1 from 2 GitHub repositories; a typical one measures about 65 × 48.8 mm and carries around 91 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Ksz9031-eval by azonenberg.
What boards using the AZ1117EH-3.3TRG1 are built for
AZ1117EH-3.3TRG1: common questions
Where can I find a AZ1117EH-3.3TRG1 reference design?
Each of the 2 boards on this page is a real design using the AZ1117EH-3.3TRG1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AZ1117EH-3.3TRG1?
The median is 65 × 48.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the AZ1117EH-3.3TRG1?
By GitHub stars, Ksz9031-eval by azonenberg, with 17 stars.
Can I simulate one of these boards using the AZ1117EH-3.3TRG1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.