2 open source boards using the B_Plug_5mm
Real designs built with the B_Plug_5mm, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Motor Card-V1
robotronik
140 × 60 mm94 parts2LNo license1
Power Circuit
142.2 × 102.9 mm49 parts2LNo license1
The B_Plug_5mm in open source designs
The gallery holds 2 open source boards using the B_Plug_5mm from 1 GitHub repository; a typical one measures about 141.1 × 81.4 mm and carries around 72 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Motor Card-V1 by robotronik.
Microcontrollers on boards using the B_Plug_5mm
B_Plug_5mm: common questions
Where can I find a B_Plug_5mm reference design?
Each of the 2 boards on this page is a real design using the B_Plug_5mm. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the B_Plug_5mm use?
Most are built on STM32 (1).
How big is a typical board using the B_Plug_5mm?
The median is 141.1 × 81.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the B_Plug_5mm?
By GitHub stars, Motor Card-V1 by robotronik, with 1 stars.
Can I simulate one of these boards using the B_Plug_5mm before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.