1 open source board using the E18-MS1PA1-IPX
Real designs built with the E18-MS1PA1-IPX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
smarthomefansThe E18-MS1PA1-IPX in open source designs
The gallery holds 1 open source boards using the E18-MS1PA1-IPX from 1 GitHub repository; a typical one measures about 50 × 50 mm and carries around 50 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Z2m partner by smarthomefans.
Microcontrollers on boards using the E18-MS1PA1-IPX
What boards using the E18-MS1PA1-IPX are built for
E18-MS1PA1-IPX: common questions
Where can I find a E18-MS1PA1-IPX reference design?
Each of the 1 boards on this page is a real design using the E18-MS1PA1-IPX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the E18-MS1PA1-IPX use?
Most are built on ESP32 (1).
How big is a typical board using the E18-MS1PA1-IPX?
The median is 50 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the E18-MS1PA1-IPX?
By GitHub stars, Z2m partner by smarthomefans, with 187 stars.
Can I simulate one of these boards using the E18-MS1PA1-IPX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.