6 open source boards using the ESP32-C6-WROOM-1-N16
Real designs built with the ESP32-C6-WROOM-1-N16, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
IDM-RoomSensor-ESP-B-ES4-AIR-R2
Xerolux
130 × 100 mm102 parts4LCERN-OHL-S-2.00ESP32
IDM-RoomSensor-ESP-B-ES5-MODULAR
Xerolux
130 × 100 mm84 parts4LCERN-OHL-S-2.00ESP32
IDM-RoomSensor-ESP-B-ES3-C6
Xerolux
130 × 80 mm80 parts4LCERN-OHL-S-2.00ESP32
IDM-RoomSensor-ESP-B-ES2-C6
Xerolux
110 × 70 mm52 parts4LCERN-OHL-S-2.00ESP32
IDM-RoomSensor-ESP-B-ES1
Xerolux
145 × 78 mm20 parts2LCERN-OHL-S-2.00ESP32
IDM-RoomSensor-ESP
Xerolux
58 × 38 mm6 parts2LCERN-OHL-S-2.00
The ESP32-C6-WROOM-1-N16 in open source designs
The gallery holds 6 open source boards using the ESP32-C6-WROOM-1-N16 from 1 GitHub repository; a typical one measures about 130 × 79 mm and carries around 66 components.
67% use four copper layers or more, and 100% carry an open source license.
The most starred is IDM-RoomSensor-ESP-B-ES4-AIR-R2 by Xerolux.
Microcontrollers on boards using the ESP32-C6-WROOM-1-N16
What boards using the ESP32-C6-WROOM-1-N16 are built for
ESP32-C6-WROOM-1-N16: common questions
Where can I find a ESP32-C6-WROOM-1-N16 reference design?
Each of the 6 boards on this page is a real design using the ESP32-C6-WROOM-1-N16. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-C6-WROOM-1-N16 use?
Most are built on ESP32 (6).
How big is a typical board using the ESP32-C6-WROOM-1-N16?
The median is 130 × 79 mm, and 33% are two-layer designs.
What is the most popular open source board using the ESP32-C6-WROOM-1-N16?
By GitHub stars, IDM-RoomSensor-ESP-B-ES4-AIR-R2 by Xerolux, with 0 stars.
Can I simulate one of these boards using the ESP32-C6-WROOM-1-N16 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.