1 open source board using the ESP32-S3-DevKit-44pin
Real designs built with the ESP32-S3-DevKit-44pin, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
engmungThe ESP32-S3-DevKit-44pin in open source designs
The gallery holds 1 open source boards using the ESP32-S3-DevKit-44pin from 1 GitHub repository; a typical one measures about 62 × 116.3 mm and carries around 9 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Patternflow by engmung.
Microcontrollers on boards using the ESP32-S3-DevKit-44pin
What boards using the ESP32-S3-DevKit-44pin are built for
ESP32-S3-DevKit-44pin: common questions
Where can I find a ESP32-S3-DevKit-44pin reference design?
Each of the 1 boards on this page is a real design using the ESP32-S3-DevKit-44pin. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-S3-DevKit-44pin use?
Most are built on ESP32 (1).
How big is a typical board using the ESP32-S3-DevKit-44pin?
The median is 62 × 116.3 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-S3-DevKit-44pin?
By GitHub stars, Patternflow by engmung, with 338 stars.
Can I simulate one of these boards using the ESP32-S3-DevKit-44pin before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.