2 open source boards using the FERRITE
Real designs built with the FERRITE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoProgrammableRelayModule4Channel
numato
91 × 82 mm72 parts2LNo license143
AVR/ArduinoProgrammableRelayModule2Channel
100 × 60 mm64 parts2LNo license143
The FERRITE in open source designs
The gallery holds 2 open source boards using the FERRITE from 1 GitHub repository; a typical one measures about 95.5 × 71 mm and carries around 68 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ProgrammableRelayModule4Channel by numato.
Microcontrollers on boards using the FERRITE
FERRITE: common questions
Where can I find a FERRITE reference design?
Each of the 2 boards on this page is a real design using the FERRITE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the FERRITE use?
Most are built on AVR/Arduino (2).
How big is a typical board using the FERRITE?
The median is 95.5 × 71 mm, and 100% are two-layer designs.
What is the most popular open source board using the FERRITE?
By GitHub stars, ProgrammableRelayModule4Channel by numato, with 143 stars.
Can I simulate one of these boards using the FERRITE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.