2 open source boards using the generic_vertical_slide_switch

Real designs built with the generic_vertical_slide_switch, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The generic_vertical_slide_switch in open source designs

The gallery holds 2 open source boards using the generic_vertical_slide_switch from 1 GitHub repository; a typical one measures about 142.2 × 85.4 mm and carries around 19 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is BIGMAX by ideometre.

Microcontrollers on boards using the generic_vertical_slide_switch

AVR/Arduino 1

What boards using the generic_vertical_slide_switch are built for

generic_vertical_slide_switch: common questions

Where can I find a generic_vertical_slide_switch reference design?

Each of the 2 boards on this page is a real design using the generic_vertical_slide_switch. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the generic_vertical_slide_switch use?

Most are built on AVR/Arduino (1).

How big is a typical board using the generic_vertical_slide_switch?

The median is 142.2 × 85.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the generic_vertical_slide_switch?

By GitHub stars, BIGMAX by ideometre, with 2 stars.

Can I simulate one of these boards using the generic_vertical_slide_switch before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.