2 open source boards using the HV2707T-C/R8X
Real designs built with the HV2707T-C/R8X, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
18V Tomography Board
Jolt8
61 × 149.5 mm18 parts2LNo license1
HV2707 breakout board
32.8 × 25.3 mm3 parts2LNo license1
The HV2707T-C/R8X in open source designs
The gallery holds 2 open source boards using the HV2707T-C/R8X from 1 GitHub repository; a typical one measures about 46.9 × 87.4 mm and carries around 11 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is 18V Tomography Board by Jolt8.
What boards using the HV2707T-C/R8X are built for
HV2707T-C/R8X: common questions
Where can I find a HV2707T-C/R8X reference design?
Each of the 2 boards on this page is a real design using the HV2707T-C/R8X. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the HV2707T-C/R8X?
The median is 46.9 × 87.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the HV2707T-C/R8X?
By GitHub stars, 18V Tomography Board by Jolt8, with 1 stars.
Can I simulate one of these boards using the HV2707T-C/R8X before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.