2 open source boards using the ILI9341_no_touch

Real designs built with the ILI9341_no_touch, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The ILI9341_no_touch in open source designs

The gallery holds 2 open source boards using the ILI9341_no_touch from 1 GitHub repository; a typical one measures about 90 × 54 mm and carries around 62 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is RoomThermostat by henkjannl.

Microcontrollers on boards using the ILI9341_no_touch

ESP32 2

What boards using the ILI9341_no_touch are built for

IoT & wireless 2

ILI9341_no_touch: common questions

Where can I find a ILI9341_no_touch reference design?

Each of the 2 boards on this page is a real design using the ILI9341_no_touch. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ILI9341_no_touch use?

Most are built on ESP32 (2).

How big is a typical board using the ILI9341_no_touch?

The median is 90 × 54 mm, and 100% are two-layer designs.

What is the most popular open source board using the ILI9341_no_touch?

By GitHub stars, RoomThermostat by henkjannl, with 1 stars.

Can I simulate one of these boards using the ILI9341_no_touch before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.