2 open source boards using the KH-1.27FH-2X10P-H4.3-SMT

Real designs built with the KH-1.27FH-2X10P-H4.3-SMT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The KH-1.27FH-2X10P-H4.3-SMT in open source designs

The gallery holds 2 open source boards using the KH-1.27FH-2X10P-H4.3-SMT from 1 GitHub repository; a typical one measures about 14 × 32.7 mm and carries around 52 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Twisted-Listen-Rev2 by Triax-Labs.

Microcontrollers on boards using the KH-1.27FH-2X10P-H4.3-SMT

ESP32 1

What boards using the KH-1.27FH-2X10P-H4.3-SMT are built for

KH-1.27FH-2X10P-H4.3-SMT: common questions

Where can I find a KH-1.27FH-2X10P-H4.3-SMT reference design?

Each of the 2 boards on this page is a real design using the KH-1.27FH-2X10P-H4.3-SMT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the KH-1.27FH-2X10P-H4.3-SMT use?

Most are built on ESP32 (1).

How big is a typical board using the KH-1.27FH-2X10P-H4.3-SMT?

The median is 14 × 32.7 mm, and 0% are two-layer designs.

What is the most popular open source board using the KH-1.27FH-2X10P-H4.3-SMT?

By GitHub stars, Twisted-Listen-Rev2 by Triax-Labs, with 2 stars.

Can I simulate one of these boards using the KH-1.27FH-2X10P-H4.3-SMT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.