1 open source board using the LITE_LCD
Real designs built with the LITE_LCD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
hisashinThe LITE_LCD in open source designs
The gallery holds 1 open source boards using the LITE_LCD from 1 GitHub repository; a typical one measures about 142 × 58 mm and carries around 143 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is QLAMP-main by hisashin.
Microcontrollers on boards using the LITE_LCD
LITE_LCD: common questions
Where can I find a LITE_LCD reference design?
Each of the 1 boards on this page is a real design using the LITE_LCD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LITE_LCD use?
Most are built on ESP32 (1).
How big is a typical board using the LITE_LCD?
The median is 142 × 58 mm, and 100% are two-layer designs.
What is the most popular open source board using the LITE_LCD?
By GitHub stars, QLAMP-main by hisashin, with 24 stars.
Can I simulate one of these boards using the LITE_LCD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.