1 open source board using the LMR36006CRNX
Real designs built with the LMR36006CRNX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
bentwireThe LMR36006CRNX in open source designs
The gallery holds 1 open source boards using the LMR36006CRNX from 1 GitHub repository; a typical one measures about 66.8 × 22 mm and carries around 64 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is USB-C-FUSB302-PI by bentwire.
Microcontrollers on boards using the LMR36006CRNX
What boards using the LMR36006CRNX are built for
LMR36006CRNX: common questions
Where can I find a LMR36006CRNX reference design?
Each of the 1 boards on this page is a real design using the LMR36006CRNX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMR36006CRNX use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the LMR36006CRNX?
The median is 66.8 × 22 mm, and 0% are two-layer designs.
What is the most popular open source board using the LMR36006CRNX?
By GitHub stars, USB-C-FUSB302-PI by bentwire, with 12 stars.
Can I simulate one of these boards using the LMR36006CRNX before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.