1 open source board using the MCP7940NT-I/MNY
Real designs built with the MCP7940NT-I/MNY, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
protolux-electronicsThe MCP7940NT-I/MNY in open source designs
The gallery holds 1 open source boards using the MCP7940NT-I/MNY from 1 GitHub repository; a typical one measures about 65 × 30 mm and carries around 66 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Soleil hardware by protolux-electronics.
Microcontrollers on boards using the MCP7940NT-I/MNY
What boards using the MCP7940NT-I/MNY are built for
MCP7940NT-I/MNY: common questions
Where can I find a MCP7940NT-I/MNY reference design?
Each of the 1 boards on this page is a real design using the MCP7940NT-I/MNY. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP7940NT-I/MNY use?
Most are built on Raspberry Pi (1).
How big is a typical board using the MCP7940NT-I/MNY?
The median is 65 × 30 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP7940NT-I/MNY?
By GitHub stars, Soleil hardware by protolux-electronics, with 22 stars.
Can I simulate one of these boards using the MCP7940NT-I/MNY before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.