1 open source board using the MIC5209 3V3
Real designs built with the MIC5209 3V3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
terjeioThe MIC5209 3V3 in open source designs
The gallery holds 1 open source boards using the MIC5209 3V3 from 1 GitHub repository; a typical one measures about 40 × 40 mm and carries around 21 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Raspberry PI power switch by terjeio.
Microcontrollers on boards using the MIC5209 3V3
What boards using the MIC5209 3V3 are built for
MIC5209 3V3: common questions
Where can I find a MIC5209 3V3 reference design?
Each of the 1 boards on this page is a real design using the MIC5209 3V3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5209 3V3 use?
Most are built on TI MSP430/CC (1).
How big is a typical board using the MIC5209 3V3?
The median is 40 × 40 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC5209 3V3?
By GitHub stars, Raspberry PI power switch by terjeio, with 2 stars.
Can I simulate one of these boards using the MIC5209 3V3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.