4 open source boards using the MIC5225-3.3YM5
Real designs built with the MIC5225-3.3YM5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ENHP
sebmorales
76.3 × 105.1 mm44 parts2LNo license9
AVR/ArduinoRc car panel
qb-creates
72 × 59.8 mm51 parts2LMIT0
AVR/ArduinoRc car
35 × 40 mm50 parts2LMIT0
AVR/ArduinoRc car remote
120 × 48 mm31 parts2LMIT0
The MIC5225-3.3YM5 in open source designs
The gallery holds 4 open source boards using the MIC5225-3.3YM5 from 2 GitHub repositories; a typical one measures about 74.1 × 53.9 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is ENHP by sebmorales.
Microcontrollers on boards using the MIC5225-3.3YM5
What boards using the MIC5225-3.3YM5 are built for
MIC5225-3.3YM5: common questions
Where can I find a MIC5225-3.3YM5 reference design?
Each of the 4 boards on this page is a real design using the MIC5225-3.3YM5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5225-3.3YM5 use?
Most are built on AVR/Arduino (3) and ESP32 (1).
How big is a typical board using the MIC5225-3.3YM5?
The median is 74.1 × 53.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC5225-3.3YM5?
By GitHub stars, ENHP by sebmorales, with 9 stars.
Can I simulate one of these boards using the MIC5225-3.3YM5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.