1 open source board using the MICROSD_SPI_OR_SDIO_CARD
Real designs built with the MICROSD_SPI_OR_SDIO_CARD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
alexbonhommeThe MICROSD_SPI_OR_SDIO_CARD in open source designs
The gallery holds 1 open source boards using the MICROSD_SPI_OR_SDIO_CARD from 1 GitHub repository; a typical one measures about 91.4 × 110 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is PicoTracker th pcb by alexbonhomme.
Microcontrollers on boards using the MICROSD_SPI_OR_SDIO_CARD
What boards using the MICROSD_SPI_OR_SDIO_CARD are built for
MICROSD_SPI_OR_SDIO_CARD: common questions
Where can I find a MICROSD_SPI_OR_SDIO_CARD reference design?
Each of the 1 boards on this page is a real design using the MICROSD_SPI_OR_SDIO_CARD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MICROSD_SPI_OR_SDIO_CARD use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the MICROSD_SPI_OR_SDIO_CARD?
The median is 91.4 × 110 mm, and 100% are two-layer designs.
What is the most popular open source board using the MICROSD_SPI_OR_SDIO_CARD?
By GitHub stars, PicoTracker th pcb by alexbonhomme, with 1 stars.
Can I simulate one of these boards using the MICROSD_SPI_OR_SDIO_CARD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.