1 open source board using the Pico-2 IO
Real designs built with the Pico-2 IO, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
derekfountainThe Pico-2 IO in open source designs
The gallery holds 1 open source boards using the Pico-2 IO from 1 GitHub repository; a typical one measures about 100 × 99.8 mm and carries around 32 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Pico Interface One by derekfountain.
Microcontrollers on boards using the Pico-2 IO
What boards using the Pico-2 IO are built for
Pico-2 IO: common questions
Where can I find a Pico-2 IO reference design?
Each of the 1 boards on this page is a real design using the Pico-2 IO. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Pico-2 IO use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the Pico-2 IO?
The median is 100 × 99.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the Pico-2 IO?
By GitHub stars, Pico Interface One by derekfountain, with 41 stars.
Can I simulate one of these boards using the Pico-2 IO before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.