1 open source board using the SN74AUP1G125DRLR
Real designs built with the SN74AUP1G125DRLR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
will127534The SN74AUP1G125DRLR in open source designs
The gallery holds 1 open source boards using the SN74AUP1G125DRLR from 1 GitHub repository; a typical one measures about 64.6 × 44 mm and carries around 54 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is CM4Card by will127534.
Microcontrollers on boards using the SN74AUP1G125DRLR
SN74AUP1G125DRLR: common questions
Where can I find a SN74AUP1G125DRLR reference design?
Each of the 1 boards on this page is a real design using the SN74AUP1G125DRLR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74AUP1G125DRLR use?
Most are built on Raspberry Pi (1).
How big is a typical board using the SN74AUP1G125DRLR?
The median is 64.6 × 44 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74AUP1G125DRLR?
By GitHub stars, CM4Card by will127534, with 95 stars.
Can I simulate one of these boards using the SN74AUP1G125DRLR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.