3 open source boards using the STC3117IJT
Real designs built with the STC3117IJT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32ArmTrax OG
embeddedalpha
93.6 × 32 mm92 partsMIT75
Backup
34.8 × 30 mm54 parts2LMIT75
Battery Charger
34.8 × 30 mm54 parts2LMIT75
The STC3117IJT in open source designs
The gallery holds 3 open source boards using the STC3117IJT from 1 GitHub repository; a typical one measures about 34.8 × 30 mm and carries around 54 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is ArmTrax OG by embeddedalpha.
Microcontrollers on boards using the STC3117IJT
What boards using the STC3117IJT are built for
STC3117IJT: common questions
Where can I find a STC3117IJT reference design?
Each of the 3 boards on this page is a real design using the STC3117IJT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STC3117IJT use?
Most are built on STM32 (1).
How big is a typical board using the STC3117IJT?
The median is 34.8 × 30 mm, and 100% are two-layer designs.
What is the most popular open source board using the STC3117IJT?
By GitHub stars, ArmTrax OG by embeddedalpha, with 75 stars.
Can I simulate one of these boards using the STC3117IJT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.