3 open source boards using the STCS2A
Real designs built with the STCS2A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Nordic nRFSenseCam Adapter rev1
Appiko
90 × 46 mm36 parts2LCERN-OHL-1.22
Nordic nRFSTCS2A driver rev1
65 × 61 mm34 parts2LCERN-OHL-1.22
Nordic nRFSenseCam STCS2A rev1
65 × 26 mm28 parts2LCERN-OHL-1.22
The STCS2A in open source designs
The gallery holds 3 open source boards using the STCS2A from 1 GitHub repository; a typical one measures about 65 × 46 mm and carries around 34 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is SenseCam Adapter rev1 by Appiko.
Microcontrollers on boards using the STCS2A
STCS2A: common questions
Where can I find a STCS2A reference design?
Each of the 3 boards on this page is a real design using the STCS2A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STCS2A use?
Most are built on Nordic nRF (3).
How big is a typical board using the STCS2A?
The median is 65 × 46 mm, and 100% are two-layer designs.
What is the most popular open source board using the STCS2A?
By GitHub stars, SenseCam Adapter rev1 by Appiko, with 2 stars.
Can I simulate one of these boards using the STCS2A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.