1 open source board using the TC1014-3.3VCT713
Real designs built with the TC1014-3.3VCT713, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
jproj3ctsThe TC1014-3.3VCT713 in open source designs
The gallery holds 1 open source boards using the TC1014-3.3VCT713 from 1 GitHub repository; a typical one measures about 21 × 50 mm and carries around 14 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Simple-Photodiode-Front-End by jproj3cts.
What boards using the TC1014-3.3VCT713 are built for
TC1014-3.3VCT713: common questions
Where can I find a TC1014-3.3VCT713 reference design?
Each of the 1 boards on this page is a real design using the TC1014-3.3VCT713. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the TC1014-3.3VCT713?
The median is 21 × 50 mm, and 100% are two-layer designs.
What is the most popular open source board using the TC1014-3.3VCT713?
By GitHub stars, Simple-Photodiode-Front-End by jproj3cts, with 3 stars.
Can I simulate one of these boards using the TC1014-3.3VCT713 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.