1 open source board using the Teensy2.0_(C)
Real designs built with the Teensy2.0_(C), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
thirteen37The Teensy2.0_(C) in open source designs
The gallery holds 1 open source boards using the Teensy2.0_(C) from 1 GitHub repository; a typical one measures about 72.4 × 48 mm and carries around 3 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is HHKB-Lite-2-Teensy by thirteen37.
Microcontrollers on boards using the Teensy2.0_(C)
What boards using the Teensy2.0_(C) are built for
Teensy2.0_(C): common questions
Where can I find a Teensy2.0_(C) reference design?
Each of the 1 boards on this page is a real design using the Teensy2.0_(C). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the Teensy2.0_(C) use?
Most are built on NXP (1).
How big is a typical board using the Teensy2.0_(C)?
The median is 72.4 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the Teensy2.0_(C)?
By GitHub stars, HHKB-Lite-2-Teensy by thirteen37, with 11 stars.
Can I simulate one of these boards using the Teensy2.0_(C) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.