1 open source board using the VL805 REAR I/O
Real designs built with the VL805 REAR I/O, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
mothenjoyer69The VL805 REAR I/O in open source designs
The gallery holds 1 open source boards using the VL805 REAR I/O from 1 GitHub repository; a typical one measures about 170 × 170 mm and carries around 465 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is D2000-mitx by mothenjoyer69.
Microcontrollers on boards using the VL805 REAR I/O
VL805 REAR I/O: common questions
Where can I find a VL805 REAR I/O reference design?
Each of the 1 boards on this page is a real design using the VL805 REAR I/O. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the VL805 REAR I/O use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the VL805 REAR I/O?
The median is 170 × 170 mm, and 0% are two-layer designs.
What is the most popular open source board using the VL805 REAR I/O?
By GitHub stars, D2000-mitx by mothenjoyer69, with 1 stars.
Can I simulate one of these boards using the VL805 REAR I/O before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.