1 open source board using the XIAO ESP32-S2
Real designs built with the XIAO ESP32-S2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LyndLabsThe XIAO ESP32-S2 in open source designs
The gallery holds 1 open source boards using the XIAO ESP32-S2 from 1 GitHub repository; a typical one measures about 39 × 63 mm and carries around 13 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Cutie-Wardriver by LyndLabs.
Microcontrollers on boards using the XIAO ESP32-S2
What boards using the XIAO ESP32-S2 are built for
XIAO ESP32-S2: common questions
Where can I find a XIAO ESP32-S2 reference design?
Each of the 1 boards on this page is a real design using the XIAO ESP32-S2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the XIAO ESP32-S2 use?
Most are built on ESP32 (1).
How big is a typical board using the XIAO ESP32-S2?
The median is 39 × 63 mm, and 100% are two-layer designs.
What is the most popular open source board using the XIAO ESP32-S2?
By GitHub stars, Cutie-Wardriver by LyndLabs, with 21 stars.
Can I simulate one of these boards using the XIAO ESP32-S2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.