2 open source boards using the 10 MHz
Real designs built with the 10 MHz, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoOpenstint transponder
zsellera
18.5 × 15 mm34 parts4LNo license12
AWG
Lee34667
86 × 33.6 mm55 parts4LNo license1
The 10 MHz in open source designs
The gallery holds 2 open source boards using the 10 MHz from 2 GitHub repositories; a typical one measures about 52.3 × 24.3 mm and carries around 45 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Openstint transponder by zsellera.
Microcontrollers on boards using the 10 MHz
What boards using the 10 MHz are built for
10 MHz: common questions
Where can I find a 10 MHz reference design?
Each of the 2 boards on this page is a real design using the 10 MHz. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the 10 MHz use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 10 MHz?
The median is 52.3 × 24.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the 10 MHz?
By GitHub stars, Openstint transponder by zsellera, with 12 stars.
Can I simulate one of these boards using the 10 MHz before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.