4 open source boards using the AMS1117-33
Real designs built with the AMS1117-33, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Z2m partner
smarthomefans
50 × 50 mm50 parts2LNo license187
STM32Lboard2
electrodyssey
203.2 × 101.6 mm214 parts4LLGPL-3.07
R2022-12
karlp
100 × 80 mm134 parts4LNo license3
R2022-10
100 × 80 mm133 parts4LNo license3
The AMS1117-33 in open source designs
The gallery holds 4 open source boards using the AMS1117-33 from 3 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 134 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Z2m partner by smarthomefans.
What boards using the AMS1117-33 are built for
AMS1117-33: common questions
Where can I find a AMS1117-33 reference design?
Each of the 4 boards on this page is a real design using the AMS1117-33. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the AMS1117-33 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the AMS1117-33?
The median is 100 × 80 mm, and 25% are two-layer designs.
What is the most popular open source board using the AMS1117-33?
By GitHub stars, Z2m partner by smarthomefans, with 187 stars.
Can I simulate one of these boards using the AMS1117-33 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.