3 open source boards using the AP22804AW5-7
Real designs built with the AP22804AW5-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Debugotron - USB Switch
alvarop
60 × 60 mm72 parts4LBSD-3-Clause52
ESPNut-D1
CIRCUITSTATE
44 × 20 mm64 parts2LMIT2
AQEYE-SB-D1
80 × 30 mm65 parts2LMIT1
The AP22804AW5-7 in open source designs
The gallery holds 3 open source boards using the AP22804AW5-7 from 3 GitHub repositories; a typical one measures about 60 × 30 mm and carries around 65 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Debugotron - USB Switch by alvarop.
What boards using the AP22804AW5-7 are built for
AP22804AW5-7: common questions
Where can I find a AP22804AW5-7 reference design?
Each of the 3 boards on this page is a real design using the AP22804AW5-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the AP22804AW5-7?
The median is 60 × 30 mm, and 67% are two-layer designs.
What is the most popular open source board using the AP22804AW5-7?
By GitHub stars, Debugotron - USB Switch by alvarop, with 52 stars.
Can I simulate one of these boards using the AP22804AW5-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.