HardLabs

8 open source boards using the BNO080

Real designs built with the BNO080, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filtersOpen license only|Most starredRecently updatedMost components

The BNO080 in open source designs

The gallery holds 8 open source boards using the BNO080 from 2 GitHub repositories; a typical one measures about 88 × 94.5 mm and carries around 243 components.

100% use four copper layers or more, and 100% carry an open source license.

The most starred is FC V5d Pro Rev1 by proveskit.

Microcontrollers on boards using the BNO080

What boards using the BNO080 are built for

BNO080: common questions

Where can I find a BNO080 reference design?

Each of the 8 boards on this page is a real design using the BNO080. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BNO080 use?

Most are built on RP2040/RP2350 (7) and STM32 (1).

How big is a typical board using the BNO080?

The median is 88 × 94.5 mm, and 0% are two-layer designs.

What is the most popular open source board using the BNO080?

By GitHub stars, FC V5d Pro Rev1 by proveskit, with 6 stars.

Can I simulate one of these boards using the BNO080 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part

AMS1117-3.3 899USBLC6-2SC6 763RP2040 566W25Q128JVS 345AP2112K-3.3 273TL072 269TL074 250ESP32-S3-WROOM-1 229CH340C 221L7805 208Pico 19274HC595 185USBLC6-2P6 174LM358 16874LS04 160SRV05-4 158AP2112K-3.3TRG1 154ESP32-WROOM-32 15374LS245 14474LS138 138W25Q128JVSIQ 135Arduino_Nano_v3.x 13474LS00 133TP4056 130