10 open source boards using the BNO080
Real designs built with the BNO080, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
FC V5d Pro Rev1
proveskit
88 × 94.5 mm255 parts4LCERN-OHL-W-2.06STM32
Sabre-Integrated flight controller
CircuitGuy943
60 × 137.1 mm260 parts4LGPL-3.02ESP32
Felső panel
NBence0
120.1 × 70.2 mm274 parts6LNo license0RP2040/RP2350
ECE 477
seanboltjes
54 × 29 mm94 parts4LNo license0RP2040/RP2350
FC V5e Production Rev1
proveskit
88 × 94.5 mm244 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V5d Production Rev2
proveskit
88 × 94.5 mm243 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V5e
proveskit
88 × 94.5 mm242 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V4c Express
proveskit
88 × 94.5 mm147 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC V4c InspireFly Special
proveskit
88 × 94.5 mm144 parts4LCERN-OHL-W-2.06RP2040/RP2350
FC Board v3
proveskit
100 × 100 mm73 parts4LCERN-OHL-W-2.06
The BNO080 in open source designs
The gallery holds 10 open source boards using the BNO080 from 4 GitHub repositories; a typical one measures about 88 × 94.5 mm and carries around 243 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is FC V5d Pro Rev1 by proveskit.
Parts used alongside the BNO080
Microcontrollers on boards using the BNO080
What boards using the BNO080 are built for
BNO080: common questions
Where can I find a BNO080 reference design?
Each of the 10 boards on this page is a real design using the BNO080. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the BNO080 use?
Most are built on RP2040/RP2350 (8), ESP32 (1) and STM32 (1).
How big is a typical board using the BNO080?
The median is 88 × 94.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the BNO080?
By GitHub stars, FC V5d Pro Rev1 by proveskit, with 6 stars.
Can I simulate one of these boards using the BNO080 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.