4 open source boards using the CAT24M01W
Real designs built with the CAT24M01W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Printalyzer - Main Board
dektronics
188 × 110 mm136 parts4LNo license37
RP2040/RP2350Node v5 0 0
VTC-WISDOM
45.7 × 76.2 mm95 parts4LCERN-OHL-W-2.02
RP2040/RP2350Pico2-demo
76.2 × 101.6 mm33 parts2LCERN-OHL-W-2.02- schematic only · 81 partsRP2040/RP2350
Node v7 0 0
81 parts6LCERN-OHL-W-2.02
The CAT24M01W in open source designs
The gallery holds 4 open source boards using the CAT24M01W from 2 GitHub repositories; a typical one measures about 76.2 × 101.6 mm and carries around 88 components.
75% use four copper layers or more, and 75% carry an open source license.
The most starred is Printalyzer - Main Board by dektronics.
Parts used alongside the CAT24M01W
Microcontrollers on boards using the CAT24M01W
What boards using the CAT24M01W are built for
CAT24M01W: common questions
Where can I find a CAT24M01W reference design?
Each of the 4 boards on this page is a real design using the CAT24M01W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CAT24M01W use?
Most are built on RP2040/RP2350 (3) and STM32 (1).
How big is a typical board using the CAT24M01W?
The median is 76.2 × 101.6 mm, and 25% are two-layer designs.
What is the most popular open source board using the CAT24M01W?
By GitHub stars, Printalyzer - Main Board by dektronics, with 37 stars.
Can I simulate one of these boards using the CAT24M01W before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.