2 open source boards using the CAT24M01XI-T2
Real designs built with the CAT24M01XI-T2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGABase board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2k
Glasgow Test Jig
108 × 45 mm108 parts2L0BSD2.2k
The CAT24M01XI-T2 in open source designs
The gallery holds 2 open source boards using the CAT24M01XI-T2 from 1 GitHub repository; a typical one measures about 94 × 47 mm and carries around 165 components.
50% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Base board by GlasgowEmbedded.
Microcontrollers on boards using the CAT24M01XI-T2
CAT24M01XI-T2: common questions
Where can I find a CAT24M01XI-T2 reference design?
Each of the 2 boards on this page is a real design using the CAT24M01XI-T2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the CAT24M01XI-T2 use?
Most are built on FPGA (1).
How big is a typical board using the CAT24M01XI-T2?
The median is 94 × 47 mm, and 50% are two-layer designs.
What is the most popular open source board using the CAT24M01XI-T2?
By GitHub stars, Base board by GlasgowEmbedded, with 2,216 stars.
Can I simulate one of these boards using the CAT24M01XI-T2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.