2 open source boards using the ECMF02-4CMX8
Real designs built with the ECMF02-4CMX8, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350Pi60 RGB v2.0 usb
1upkeyboards
285 × 94.6 mm255 parts2LCC-BY-NC-4.08
RP2040/RP2350Pi60 HSE v1.1
285 × 95.1 mm185 parts2LCC-BY-NC-4.08
The ECMF02-4CMX8 in open source designs
The gallery holds 2 open source boards using the ECMF02-4CMX8 from 1 GitHub repository; a typical one measures about 285 × 94.8 mm and carries around 220 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Pi60 RGB v2.0 usb by 1upkeyboards.
Microcontrollers on boards using the ECMF02-4CMX8
ECMF02-4CMX8: common questions
Where can I find a ECMF02-4CMX8 reference design?
Each of the 2 boards on this page is a real design using the ECMF02-4CMX8. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ECMF02-4CMX8 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the ECMF02-4CMX8?
The median is 285 × 94.8 mm, and 100% are two-layer designs.
What is the most popular open source board using the ECMF02-4CMX8?
By GitHub stars, Pi60 RGB v2.0 usb by 1upkeyboards, with 8 stars.
Can I simulate one of these boards using the ECMF02-4CMX8 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.