1 open source board using the EFM32PG22C200F512IM40
Real designs built with the EFM32PG22C200F512IM40, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MR-DOSThe EFM32PG22C200F512IM40 in open source designs
The gallery holds 1 open source boards using the EFM32PG22C200F512IM40 from 1 GitHub repository; a typical one measures about 100 × 100 mm and carries around 341 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is MWGEN-G1 by MR-DOS.
Microcontrollers on boards using the EFM32PG22C200F512IM40
EFM32PG22C200F512IM40: common questions
Where can I find a EFM32PG22C200F512IM40 reference design?
Each of the 1 boards on this page is a real design using the EFM32PG22C200F512IM40. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the EFM32PG22C200F512IM40 use?
Most are built on Silicon Labs (1).
How big is a typical board using the EFM32PG22C200F512IM40?
The median is 100 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the EFM32PG22C200F512IM40?
By GitHub stars, MWGEN-G1 by MR-DOS, with 18 stars.
Can I simulate one of these boards using the EFM32PG22C200F512IM40 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.