3 open source boards using the ENC28J60x-SS

Real designs built with the ENC28J60x-SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filtersOpen license only|Most starred Recently updated Most components

The ENC28J60x-SS in open source designs

The gallery holds 3 open source boards using the ENC28J60x-SS from 3 GitHub repositories; a typical one measures about 87.9 × 55.4 mm and carries around 83 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is HexGateway by gblach.

Microcontrollers on boards using the ENC28J60x-SS

What boards using the ENC28J60x-SS are built for

ENC28J60x-SS: common questions

Where can I find a ENC28J60x-SS reference design?

Each of the 3 boards on this page is a real design using the ENC28J60x-SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the ENC28J60x-SS use?

Most are built on ESP32 (1), Raspberry Pi (1) and STM32 (1).

How big is a typical board using the ENC28J60x-SS?

The median is 87.9 × 55.4 mm, and 100% are two-layer designs.

What is the most popular open source board using the ENC28J60x-SS?

By GitHub stars, HexGateway by gblach, with 10 stars.

Can I simulate one of these boards using the ENC28J60x-SS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.