1 open source board using the JTD6206-3.3V
Real designs built with the JTD6206-3.3V, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
makerspaceltThe JTD6206-3.3V in open source designs
The gallery holds 1 open source boards using the JTD6206-3.3V from 1 GitHub repository; a typical one measures about 84 × 41 mm and carries around 80 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is WormControl-Relay15x5t15-ControlBoard by makerspacelt.
Microcontrollers on boards using the JTD6206-3.3V
JTD6206-3.3V: common questions
Where can I find a JTD6206-3.3V reference design?
Each of the 1 boards on this page is a real design using the JTD6206-3.3V. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the JTD6206-3.3V use?
Most are built on ESP32 (1).
How big is a typical board using the JTD6206-3.3V?
The median is 84 × 41 mm, and 0% are two-layer designs.
What is the most popular open source board using the JTD6206-3.3V?
By GitHub stars, WormControl-Relay15x5t15-ControlBoard by makerspacelt, with 0 stars.
Can I simulate one of these boards using the JTD6206-3.3V before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.