2 open source boards using the LP5900SD-3.3/NOPB
Real designs built with the LP5900SD-3.3/NOPB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32LMS8001 App
myriadrf
60 × 60 mm282 partsNo license50
AVR/ArduinoZipper v.2
107 × 78 mm172 parts6LNo license50
The LP5900SD-3.3/NOPB in open source designs
The gallery holds 2 open source boards using the LP5900SD-3.3/NOPB from 1 GitHub repository; a typical one measures about 83.5 × 69 mm and carries around 227 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is LMS8001 AppPCB by myriadrf.
Microcontrollers on boards using the LP5900SD-3.3/NOPB
What boards using the LP5900SD-3.3/NOPB are built for
LP5900SD-3.3/NOPB: common questions
Where can I find a LP5900SD-3.3/NOPB reference design?
Each of the 2 boards on this page is a real design using the LP5900SD-3.3/NOPB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LP5900SD-3.3/NOPB use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the LP5900SD-3.3/NOPB?
The median is 83.5 × 69 mm, and 0% are two-layer designs.
What is the most popular open source board using the LP5900SD-3.3/NOPB?
By GitHub stars, LMS8001 AppPCB by myriadrf, with 50 stars.
Can I simulate one of these boards using the LP5900SD-3.3/NOPB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.