3 open source boards using the MAX809M
Real designs built with the MAX809M, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoAT90S2323/AT90S2343 demo board
atoomnetmarc
99.1 × 99.1 mm167 parts2LApache-2.04
ESP32ADLSC
137.2 × 61 mm48 parts2LApache-2.01
AVR/ArduinoAT90S8535 demo board
99.1 × 99.1 mm41 parts2LApache-2.04
The MAX809M in open source designs
The gallery holds 3 open source boards using the MAX809M from 2 GitHub repositories; a typical one measures about 99.1 × 99.1 mm and carries around 48 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is AT90S2323/AT90S2343 demo board by atoomnetmarc.
Parts used alongside the MAX809M
Microcontrollers on boards using the MAX809M
What boards using the MAX809M are built for
MAX809M: common questions
Where can I find a MAX809M reference design?
Each of the 3 boards on this page is a real design using the MAX809M. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MAX809M use?
Most are built on AVR/Arduino (2) and ESP32 (1).
How big is a typical board using the MAX809M?
The median is 99.1 × 99.1 mm, and 100% are two-layer designs.
What is the most popular open source board using the MAX809M?
By GitHub stars, AT90S2323/AT90S2343 demo board by atoomnetmarc, with 4 stars.
Can I simulate one of these boards using the MAX809M before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.