3 open source boards using the MCP6L02x-xMS
Real designs built with the MCP6L02x-xMS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Wearable air quality
AMA-Labs
20.9 × 22.6 mm10 parts2LNo license0
STM32Stm32 esc
dragonlock2
36 × 59 mm106 parts2LApache-2.013
AVR/ArduinoPsu monitor
67 × 28 mm94 parts2LApache-2.013
The MCP6L02x-xMS in open source designs
The gallery holds 3 open source boards using the MCP6L02x-xMS from 2 GitHub repositories; a typical one measures about 36 × 28 mm and carries around 94 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Stm32 esc by dragonlock2.
Microcontrollers on boards using the MCP6L02x-xMS
What boards using the MCP6L02x-xMS are built for
MCP6L02x-xMS: common questions
Where can I find a MCP6L02x-xMS reference design?
Each of the 3 boards on this page is a real design using the MCP6L02x-xMS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP6L02x-xMS use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the MCP6L02x-xMS?
The median is 36 × 28 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP6L02x-xMS?
By GitHub stars, Stm32 esc by dragonlock2, with 13 stars.
Can I simulate one of these boards using the MCP6L02x-xMS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.