3 open source boards using the MIC29302
Real designs built with the MIC29302, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MC60
wyolum
60 × 70 mm97 parts2LNo license17
AVR/ArduinoWavelab-24G-Addon module
PA0MHE
118.5 × 94.5 mm187 parts2LMIT5
STM32Internet of booze
q3k
121.9 × 49.5 mm88 parts2LGPL-3.03
The MIC29302 in open source designs
The gallery holds 3 open source boards using the MIC29302 from 3 GitHub repositories; a typical one measures about 118.5 × 70 mm and carries around 97 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is MC60 by wyolum.
Microcontrollers on boards using the MIC29302
What boards using the MIC29302 are built for
MIC29302: common questions
Where can I find a MIC29302 reference design?
Each of the 3 boards on this page is a real design using the MIC29302. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC29302 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the MIC29302?
The median is 118.5 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC29302?
By GitHub stars, MC60 by wyolum, with 17 stars.
Can I simulate one of these boards using the MIC29302 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.