1 open source board using the MIC39100-3.3WS
Real designs built with the MIC39100-3.3WS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
StulinazThe MIC39100-3.3WS in open source designs
The gallery holds 1 open source boards using the MIC39100-3.3WS from 1 GitHub repository; a typical one measures about 80 × 80 mm and carries around 67 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is STM32F103RB USB to UART SPI I2C by Stulinaz.
Microcontrollers on boards using the MIC39100-3.3WS
What boards using the MIC39100-3.3WS are built for
MIC39100-3.3WS: common questions
Where can I find a MIC39100-3.3WS reference design?
Each of the 1 boards on this page is a real design using the MIC39100-3.3WS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC39100-3.3WS use?
Most are built on STM32 (1).
How big is a typical board using the MIC39100-3.3WS?
The median is 80 × 80 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC39100-3.3WS?
By GitHub stars, STM32F103RB USB to UART SPI I2C by Stulinaz, with 23 stars.
Can I simulate one of these boards using the MIC39100-3.3WS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.