1 open source board using the MIC5365-3.3YMT-TZ
Real designs built with the MIC5365-3.3YMT-TZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
sawaizThe MIC5365-3.3YMT-TZ in open source designs
The gallery holds 1 open source boards using the MIC5365-3.3YMT-TZ from 1 GitHub repository; a typical one measures about 38.9 × 6.6 mm and carries around 17 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is ArtDecoEarrings by sawaiz.
Microcontrollers on boards using the MIC5365-3.3YMT-TZ
What boards using the MIC5365-3.3YMT-TZ are built for
MIC5365-3.3YMT-TZ: common questions
Where can I find a MIC5365-3.3YMT-TZ reference design?
Each of the 1 boards on this page is a real design using the MIC5365-3.3YMT-TZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC5365-3.3YMT-TZ use?
Most are built on AVR/Arduino (1).
How big is a typical board using the MIC5365-3.3YMT-TZ?
The median is 38.9 × 6.6 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC5365-3.3YMT-TZ?
By GitHub stars, ArtDecoEarrings by sawaiz, with 18 stars.
Can I simulate one of these boards using the MIC5365-3.3YMT-TZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.