2 open source boards using the OKL2-T_12-W12
Real designs built with the OKL2-T_12-W12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry PiFlicker
danfoisy
149.9 × 149.2 mm497 parts2LMIT38
Raspberry PiFlicker old
493 parts2LMIT38
The OKL2-T_12-W12 in open source designs
The gallery holds 2 open source boards using the OKL2-T_12-W12 from 1 GitHub repository; a typical one measures about 149.9 × 149.2 mm and carries around 495 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Flicker by danfoisy.
Microcontrollers on boards using the OKL2-T_12-W12
OKL2-T_12-W12: common questions
Where can I find a OKL2-T_12-W12 reference design?
Each of the 2 boards on this page is a real design using the OKL2-T_12-W12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the OKL2-T_12-W12 use?
Most are built on Raspberry Pi (2).
How big is a typical board using the OKL2-T_12-W12?
The median is 149.9 × 149.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the OKL2-T_12-W12?
By GitHub stars, Flicker by danfoisy, with 38 stars.
Can I simulate one of these boards using the OKL2-T_12-W12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.