6 open source boards using the PMW3360
Real designs built with the PMW3360, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pmw3360 pcb ffc
siderakb
27 × 22.5 mm13 parts2LCERN-OHL-P-2.0194
Raspberry PiORCA CORE
UEC-RMF-Rescue
99 × 94 mm182 parts2LNo license0
ESP32Trackball
mornepousse
52 × 72.1 mm51 parts2LNo license0
ESP32MaSe
63.8 × 97.6 mm36 parts2LNo license0
Raspberry PiORCA CORE A
99 × 99 mm96 parts2LNo license0
ESP32Mcu board
29 × 29.9 mm12 parts2LNo license0
The PMW3360 in open source designs
The gallery holds 6 open source boards using the PMW3360 from 3 GitHub repositories; a typical one measures about 57.9 × 83 mm and carries around 44 components.
100% are two-layer designs, the rest use four layers or more, and 17% carry an open source license.
The most starred is Pmw3360 pcb ffc by siderakb.
Microcontrollers on boards using the PMW3360
What boards using the PMW3360 are built for
PMW3360: common questions
Where can I find a PMW3360 reference design?
Each of the 6 boards on this page is a real design using the PMW3360. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the PMW3360 use?
Most are built on ESP32 (3) and Raspberry Pi (2).
How big is a typical board using the PMW3360?
The median is 57.9 × 83 mm, and 100% are two-layer designs.
What is the most popular open source board using the PMW3360?
By GitHub stars, Pmw3360 pcb ffc by siderakb, with 194 stars.
Can I simulate one of these boards using the PMW3360 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.