2 open source boards using the SIP32431DR3-T1GE3

Real designs built with the SIP32431DR3-T1GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filtersOpen license only|Most starred Recently updated Most components

The SIP32431DR3-T1GE3 in open source designs

The gallery holds 2 open source boards using the SIP32431DR3-T1GE3 from 2 GitHub repositories; a typical one measures about 72.3 × 56 mm and carries around 96 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Cupltag by cuplsensor.

Microcontrollers on boards using the SIP32431DR3-T1GE3

What boards using the SIP32431DR3-T1GE3 are built for

SIP32431DR3-T1GE3: common questions

Where can I find a SIP32431DR3-T1GE3 reference design?

Each of the 2 boards on this page is a real design using the SIP32431DR3-T1GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SIP32431DR3-T1GE3 use?

Most are built on STM32 (1) and TI MSP430/CC (1).

How big is a typical board using the SIP32431DR3-T1GE3?

The median is 72.3 × 56 mm, and 100% are two-layer designs.

What is the most popular open source board using the SIP32431DR3-T1GE3?

By GitHub stars, Cupltag by cuplsensor, with 16 stars.

Can I simulate one of these boards using the SIP32431DR3-T1GE3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.