7 open source boards using the SIP32431DR3-T1GE3
Real designs built with the SIP32431DR3-T1GE3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI MSP430/CC
Cupltag
cuplsensor
54 × 54 mm25 parts2LCustom license16NanoSense-Motion
bluetiger9
33 × 22 mm35 parts2LNo license8STM32
EcoApi BeeHiveMonitoring
EcoApi
90.6 × 58 mm166 parts2LGPL-3.04Qsbc
qfreiman
80 × 80 mm409 parts8LGPL-3.03RP2040/RP2350
Seven Segment Main Board
cscott
33.8 × 131 mm70 parts2LNo license2ESP32
Sensor node
mirra-org
93 × 93 mm51 parts2LApache-2.00GPIO Board
WestianPKl
64.2 × 35.6 mm21 parts2LNo license0
How designs wire the SIP32431DR3-T1GE3
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SIP32431DR3-T1GE3 connects to, and the resistors, capacitors and other passives placed on it.
- The IN pin is tied to BATT on 6 of 7 designs.
- The OUT pin is tied to 3.3V on 5 of 7 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 71% · a signal 29% | — |
| GNDpin 2, 5 | Connected to: GND 100% | — |
| INpin 4 | Connected to: BATT 86% | — |
| NCpin 6 | Connected to: Not connected 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cupltag by cuplsensor, NanoSense-Motion by bluetiger9, EcoApi BeeHiveMonitoring by EcoApi and Qsbc by qfreiman.
The SIP32431DR3-T1GE3 in open source designs
The gallery holds 7 open source boards using the SIP32431DR3-T1GE3 from 7 GitHub repositories; a typical one measures about 64.2 × 58 mm and carries around 51 components.
86% are two-layer designs, the rest use four layers or more, and 43% carry an open source license.
The most starred is Cupltag by cuplsensor.
Microcontrollers on boards using the SIP32431DR3-T1GE3
What boards using the SIP32431DR3-T1GE3 are built for
SIP32431DR3-T1GE3: common questions
Where can I find a SIP32431DR3-T1GE3 reference design?
Each of the 7 boards on this page is a real design using the SIP32431DR3-T1GE3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SIP32431DR3-T1GE3 IN pin connected?
The IN pin is tied to BATT on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the SIP32431DR3-T1GE3.
How is the SIP32431DR3-T1GE3 OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 7 designs (a signal on 2). Counted from the KiCad layouts of 7 open source designs using the SIP32431DR3-T1GE3.
Which microcontrollers do boards using the SIP32431DR3-T1GE3 use?
Most are built on ESP32 (1), RP2040/RP2350 (1), STM32 (1) and TI MSP430/CC (1).
How big is a typical board using the SIP32431DR3-T1GE3?
The median is 64.2 × 58 mm, and 86% are two-layer designs.
What is the most popular open source board using the SIP32431DR3-T1GE3?
By GitHub stars, Cupltag by cuplsensor, with 16 stars.
Can I simulate one of these boards using the SIP32431DR3-T1GE3 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.