1 open source board using the SMA-J-P-H-ST-TH1
Real designs built with the SMA-J-P-H-ST-TH1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
leonardoboveThe SMA-J-P-H-ST-TH1 in open source designs
The gallery holds 1 open source boards using the SMA-J-P-H-ST-TH1 from 1 GitHub repository; a typical one measures about 89.9 × 66 mm and carries around 29 components.
100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is LO mother by leonardobove.
Microcontrollers on boards using the SMA-J-P-H-ST-TH1
SMA-J-P-H-ST-TH1: common questions
Where can I find a SMA-J-P-H-ST-TH1 reference design?
Each of the 1 boards on this page is a real design using the SMA-J-P-H-ST-TH1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SMA-J-P-H-ST-TH1 use?
Most are built on RP2040/RP2350 (1).
How big is a typical board using the SMA-J-P-H-ST-TH1?
The median is 89.9 × 66 mm, and 100% are two-layer designs.
What is the most popular open source board using the SMA-J-P-H-ST-TH1?
By GitHub stars, LO mother by leonardobove, with 0 stars.
Can I simulate one of these boards using the SMA-J-P-H-ST-TH1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.